The new 695XL features an easy-to-start engine with a higher energy ignition system and durable, long-lasting components including a new muffler, carburetor, and piston and cylinder.
Based on the best-selling 695 saw platform, the 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors, and concrete professionals.
Available with 12 in. (30 cm), 16 in. (40cm) guide bars and the entire line of FORCE3®, FORCE4®, and PowerGrit®Series diamond chains.
FEATURES AND BENEFITS
- Use on concrete, stone, masonry, ductile iron pipe, cast iron pipe, and more,
- Most versatile gas power cutter,
- New piston and cylinder lowers the engine temperature,
- Better operator control,
- Longer life muffler with reinforced internal baffle,
- Easy-to-start with higher energy ignition system,
- New easy-to-tune carburetor.
Engine Type | 2-Stroke, Air Cooled |
Displacement | 94cc (5.7 cu-in) |
Horsepower | 4.8kW (6.4 hp) @ 9000 rpm |
Torque | 5.7 Nm (50.4 in-lbs) @ 7200 rpm |
Engine Speed | 9,300 +/- 150 rpm (max)/2,700 +/- 100 rpm (idle) |
Chain Speed at Maximum Power | 28 m/s (5500 ft /min) |
Weight | 9.5 kg (21 lbs) powerhead only |
Dimensions | 46cm (18″) L x 36cm (14″) H x 30cm (12″) W |
Starter | Recoil, dust, and water-resistant |
Ignition | Special water-resistant electronic ignition |
Fuel ratio | 2% (50:1) gasoline-to-oil |
Fuel Capacity | 1 liter (0.26 gallon) |
Water Supply Requirement | Minimum: 1.5 bar (20 psi) |
Water Flow Requirement | Minimum: 1.5 bar (20 psi) |
Guaranteed Sound Power Level, Lwa (1) | 115 dB(A); (Kwa=1.0 dB(A)) |
Equivalent Sound Pressure at the Operator’s Ear Lwa | 104.6 dB(A) (K=1.0 dB(A)) |
Vibration, ahv eq Concrete Cutting (2) | 3.6 m/s2 (K=1.0 m/s2) Front Handle/3.1 m/s2 (K=1.0 m/s2) Rear Handle |
Vibration, ahv eq Pipe Cutting (2) | 5.62 m/s (K=0.2 m/s2) Front Handle/5.28 m/s2 (K=0.2 m/s2) Rear Handle |