Whether you need to clean up a dangerous chemical spill or eliminate a slip-and-fall hazard, we have a spill kit for any size and type of spill. All our spill kits are packed with quality SpillTech products to help you comply with environmental regulations. Having the right absorbents on-hand when spills occur ensures a quick response – your best weapon against spills.
This 15-gallon spill kit is perfect for vehicles and includes:
| Qty | Description |
| 1 | YELLOW ZIPPER BAG |
| 10 | OIL-ONLY RESPONDER MAT |
| 3 | OIL-ONLY RESPONDER SOCKS |
| 1 | SPLASH GLOVES |
| 1 | SPLASH GOGGLES |
| 1 | PLUG N’ DIKE REPAIR COMPOUND |
| 1 | POLY DRAIN COVER |
| 1 | 6 MIL DISPOSAL BAG |
| 1 | List of Contents |
| 1 | Set of Spill Procedure Instructions |
SPILL PROCEDURE INSTRUCTIONS
- EMPTY OUT DRUM AND PUT ON ALL PROTECTIVE WEAR,
- IF DRAIN OR MANHOLE ARE NEARBY, IMMEDIATELY COVER WITH DRAIN COVER,
- ASSESS LEAK ORIGIN AND ATTEMPT TO STOP LEAK AT SOURCE WITH PLUG ‘N’ DIKE REPAIR COMPOUND, INSTRUCTIONS AS NOTED BELOW,
- ENCIRCLE SPILL WITH ADSORBENT BOOM,
- PLACE ADSORBENT PADS INTO SPILL CIRCLE TO ADSORB FLUID, RETRIEVE WHEN SATURATED,
- USE GLOVES AND PLACE CONTAMINATED CONTENTS INTO DISPOSAL BAGS,
- CONTACT YOUR ENVIRONMENTAL OR SAFETY OFFICER FOR CORRECT DISPOSAL PROCEDURES.
PLUG AND DIKE PROCEDURE
- Wear gloves for the entire procedure,
- Open Plug N’ Dike jar,
- Scoop and press onto puncture,
- Give 1/4 turn to lock into place,
- Smooth off outside and edges with water,
- Cover patch with grease if left in place for more than 8 hours to prevent drying up,
- If the drum is a problem, roll on the side with the puncture facing up,
- This is only a temporary plug method. Attempt to find a more permanent solution as soon as possible.
