| SPECS | 5DDT | 6DDT |
| TORQUE (FT-LBS @ 3000 PSI) | 4,067 | 5,012 |
| MAX TORQUE (FT-LBS @ 3500 PSI) | 4,745 | 5,847 |
| RECOMMENDED FLOW (GPM) | 10-36 | 10-36 |
| MOTOR TYPE | EATON | EATON |
| MAX PRESSURE (DO NOT EXCEED) | 3500 PSI @ 27 GPM | |
| MAX FLOW (DO NOT EXCEED) | 53 GPM @ 1800 PSI | |
| MAX HORSE POWER | 55 | 55 |
| PRESSURE RELIEF VALVE | INCLUDED | INCLUDED |
| STANDARD OUTPUT SHAFT | 2.5″ HEX | 2.5″ HEX |
| RECOMMENDED AUGER | A6 / RC6 | A6 / RC6 |
| MAX AUGER DIAMETER (CLAY / SHALE)* | 24″ | 30″ |
| MAX AUGER DIAMETER (EARTH)* | 40″ | 40″ |
| WEIGHT (LBS) | 350 | 350 |
| OVERALL LENGTH (IN) | 34.4″ | 34.4″ |
| DIAMETER (IN) | 13.4″ | 13.4″ |
2 Speed Augers For High Flow Skid Steer Loaders 4.5 – 8t
Digga’s drilling augers for skid steer loaders are the ultimate in performance, quality, and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Complete manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.