Menu Close

Digga Auger Drives For Skid steer Loaders 2.5t – 3.8t

Digga’s drilling augers for skid steer loaders are the ultimate in performance, quality, and cost effectiveness. Over 30 years of design and development has produced the highest quality range of auger drives on the market today. Complete manufactured and assembled by Digga, using only the highest grade materials and strictest quality control.

SPECS3DSS4DSS4DDS
TORQUE (FT-LBS
@ 3000 PSI
2,8293,2753,583
MAX TORQUE FT-LBS
@ 3500 PSI
3,3003,8214,180
RECOMMENDED FLOW (GPM)10-3010-3010-36
MOTOR TYPEEATONEATONEATON
MAX PRESSURE –
DO NOT EXCEED
3500 PSI @ 16 GPM3500 PSI
@ 27 GPM
MAX FLOW –
DO NOT EXCEED
30 GPM @ 1800 PSI42 GPM
@ 3100 PSI
MAX HORSE POWER343455
PRESSURE RELIEF VALVEN/AN/AINCLUDED
STANDARD OUTPUT SHAFT2″ HEX2″ HEX2″ HEX
HALOOPTIONALOPTIONALOPTIONAL
RECOMMENDED AUGERA4 / RC4A4 / RC4A4 / RC4
MAX DRILLING DIAMETER
(CLAY / SHALE)*
24″24″24″
MAX DRILLING DIAMETER
(EARTH)*
30″30″40″
WEIGHT (LBS)123125180
OVERALL LENGTH (IN)25.9″25.9″29″
DIAMETER (IN)9.4″9.4″9.4″

(*) Max/min drilling diameter (DIA) dependant on ground conditions. Guide is a recommendation only.